End Cap for 2020 V-Slot Rail

Looking to fine-tune your V Wheels? Our Eccentric Spacers of 6/6.35mm height are perfect for adjusting your V Wheels onto V-Slot. With an approx 0.79mm adjustment range, you can be sure of a very strong and secure connection between the V rail and the wheel.

The Belt Mount Plate L Type is an easy way to attach the ends of an open-ended belt to a V-Slot or another t-slot extrusion. To tension the belt, attach one end then tension the belt as a second clip is attached. Using the perpendicular hole, an M5 screw and nut can be used as a tensioner. Both G2T and GT3 belts can be secured using these Belt Mounting Plates.

These rubber end stops are perfect for use with linear rails. By placing them on the end of the rail, you can prevent the carriage from running too far. They work well with limit switches as an additional measure of protection.

Check out our awesome, high-quality, custom-made aluminum spacers! They make great, sturdy standoffs/spacings for your projects. This Metric version of the spacer is 10mm OD and 5mm ID, so you know it'll be a stable platform. The spacer has M5 ID to give a thicker wall to keep the screw snug and centered.

T-Nuts are essential for creating a sturdy and reliable connection with V-Slot and most aluminum T-Slot extrusion. Our T-Nuts have angled corners that make it easier to slide into slots, so you can create a stronger connection without all the hassle.

The 10mm Metric Ratchet Combination Spanner is a great wrench for quickly and easily tightening or loosening nuts and bolts. Just cycle the handle backward and forward to get continuous rotary motion without having to remove the wrench from the nut or bolt head.

Cable Ties – Pack 10 – 2 x 100mm; Looking for an easy way to keep your cords and cables organized? Check out our selection of cable ties. With 10 ties in each pack, you'll have plenty to keep your space neat and tidy.

Check out this great door handle! This handle bolts directly to V-Slot extrusion with included mounting screws and t-nuts, making it a quick and easy addition to your projects.

The Threaded Rod Plate is a great way to mount your NEMA 23 stepper motor. It's compatible with V-Slot and OpenRail, and it gives you a lot of versatility for your projects.

The Belt and Pinion system provides smooth, accurate, and quick operation along V-Slot Linear Rail - perfect for your industrial projects and hobby projects, and more. The kit is an easy way to get all the pieces needed for the build, and you can customize it with different options of V-Slot Extrusions and Gantry Plate. Follow the instructions below to put it together step by step. This model 2 has two gantry plates when compared to model 1, and this offers more rigidity.

This Bundle is a great way to get all the parts for building an open rail Gantry. The gantry is used along with open rails, which are additional rails and can be attached to the different sizes of v-slot rails. Wheels with v-grooves are used for openrails.